Phoenix Contact
Showing 2401–2416 of 4585 results
-
2865609 Phoenix Contact – Solenoid driver – MACX MCR-EX-SL-SD-24-48-LP Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 48 mA. For gases up to Group IIC, loop-powered, electrical isolation, SIL 3. Screw connection.
-
2865625 Phoenix Contact – Power and error message module – MACX MCR-PTB Power and fault signaling module with screw connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector
-
2865654 Phoenix Contact – Temperature measuring transducer – MACX MCR-EX-T-UI-UP Freely programmable Ex-i temperature transducer with analog output and 1 limit value relay, standard configuration, resistance thermometer in 2-, 3-, or 4-wire technology, thermocouples, electrical isolation, wide-range power supply, screw connection, SIL, PL.
-
2865696 Phoenix Contact – Input isolating amplifier – PI-EX-AIS Ex i analog input: Input isolating amplifier, HART. Sends 4-20 mA signals from externally supplied measuring transducers installed in Ex areas to a load in safe areas. Galvanic 3-way isolation (input / output / supply).
-
2865751 Phoenix Contact – Temperature measuring transducer – MACX MCR-EX-T-UIREL-UP Programmable temperature transducer with analog output and 3 limit value relays, intrinsically safe signal input, resistance thermometer in 2-, 3-, or 4-wire technology, thermocouples, electrical isolation, wide-range power supply, screw connection, SIL, PL.
-
2865764 Phoenix Contact – Solenoid driver – MACX MCR-EX-SL-SD-21-40-LP Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 40 mA. For gases up to Group IIC, loop-powered, electrical isolation, SIL 3. Screw connection.
-
2865793 Phoenix Contact – Power/input isolating amplifier – MACX MCR-EX-SL-RPSSI-I-UP Ex i repeater power supply and input isolating amplifier, HART Sends fed or active 0/4-20 mA signals from the Ex area to a load (active or passive) to the safe area. Electrical 3-way isolation SIL 2, wide range power supply.
-
2865913 Phoenix Contact – Solenoid driver – PI-EX-SD-21-40 Ex i solenoid driver, pluggable. To control intrinsically safe solenoid valves, alarm modules as well as simple electric equipment installed in Ex areas. For Group IIC gases, loop-powered. Electrical isolation.
-
2865955 Phoenix Contact – MACX MCR-SL-RPSSI-I Repeater power supply and input isolating amplifier, HART. Transfers supplied or active 0/4 – 20 mA signals to a load (active or passive). 3-way electrical isolation, SIL 2 according to IEC 61508.
-
2865968 Phoenix Contact – MACX MCR-SL-RPSSI-I-UP Repeater power supply for supplying 2 and 3-conductor transmitters with HART transmission and wide range power supply, SIL, screw connection
-
2865971 Phoenix Contact – Output signal conditioner – MACX MCR-SL-IDSI-I Output signal conditioner, HART. Isolates and transfers 0/4-20 mA signals to a load (I/P converters, control valves, displays). Electrical 3-way isolation, wire break recognition, SIL 2 in accordance with IEC 61508, screw connection.
-
2865984 Phoenix Contact – Isolation amplifier – MACX MCR-EX-SL-2NAM-R-UP 2-channel Ex-i NAMUR isolation amplifier with wide-range power supply for proximity sensors and switches. Every channel has a relay with PDT contact as a signal output. Line fault detection (LFD), 3-way isolation, SIL 2.
-
2865997 Phoenix Contact – Isolation amplifier – MACX MCR-SL-NAM-R NAMUR signal conditioners for operating proximity sensors and switches. The signals are transmitted to the control level via relay output (changeover contact). Line fault detection (LFD), 3-way electrical isolation, SIL 2, with screw connection.
-
2866006 Phoenix Contact – Signal isolator – MACX MCR-EX-SL-NAM-NAM Ex i NAMUR signal conditioner. For operating Ex i proximity sensors and switches in the Ex area. Passive transistor output (resistive according to EN 60947-5-6), line fault transparency, up to SIL 2 according to IEC 61508 screw connection.
-
2866019 Phoenix Contact – Monitoring relay – EMD-SL-C-OC-10 Monitoring relay for monitoring 1-phase currents of 0…10 A AC/DC, overcurrent, supply voltage can be selected using power module, 1 PDT
-
2866022 Phoenix Contact – Monitoring relay – EMD-FL-C-10 Monitoring relay for monitoring 1-phase currents of 0…10 A AC/DC, overcurrent/undercurrent or window, error memory, wide-range power supply unit, 2 PDTs