Phoenix Contact
Showing 3505–3520 of 4585 results
-
2905987 Phoenix Contact – FLT-SEC-P-T1-1C-440/35-FM Plug-in lightning current arrester for higher nominal voltages, according to Type 1/Class I, for 1-phase power supply networks in TN and IT versions (L1, PE).
-
2905988 Phoenix Contact – FLT-SEC-P-T1-3C-440/35-FM Plug-in lightning current arrester for higher nominal voltages, according to Type 1/Class I, for 3-phase power supply networks in TN and IT versions (L1, L2, L3, PE).
-
2906031 Phoenix Contact – CBMC E4 24DC/1-4A NO Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
-
2906032 Phoenix Contact – CBMC E4 24DC/1-10A NO Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
-
2906058 Phoenix Contact – Hybrid motor starter – ELR H5-IES-PT-24DC/500AC-06-T Hybrid motor starter for reversing 3~ AC motors up to 550 V AC, with 24 V DC input, 0.6 A output current, emergency stop function, adjustable overload shutdown, higher transient voltage strength, and push-in connection.
-
2906059 Phoenix Contact – Hybrid motor starter – ELR H5-IES-PT-24DC/500AC-2-T Hybrid motor starter for reversing 3~ AC motors up to 550 V AC, with 24 V DC input, 2.4 A output current, emergency stop function, adjustable overload shutdown, higher transient voltage strength, and push-in connection.
-
2906060 Phoenix Contact – Hybrid motor starter – ELR H5-IES-PT-24DC/500AC-9-T Hybrid motor starter for reversing 3~ AC motors up to 550 V AC, with 24 V DC input, 9 A output current, emergency stop function, adjustable overload shutdown, higher transient voltage strength, and push-in connection.
-
2906061 Phoenix Contact – Hybrid motor starter – ELR H3-IES-PT-24DC/500AC-06-T Hybrid motor starter for starting 3~ AC motors up to 550 V AC, with 24 V DC input, 0.6 A output current, emergency stop function, adjustable overload shutdown, higher transient voltage strength, and push-in connection.
-
2906062 Phoenix Contact – Hybrid motor starter – ELR H3-IES-PT-24DC/500AC-2-T Hybrid motor starter for starting 3~ AC motors up to 550 V AC, with 24 V DC input, 2.4 A output current, emergency stop function, adjustable overload shutdown, higher transient voltage strength, and push-in connection.
-
2906064 Phoenix Contact – Hybrid motor starter – ELR H3-IES-PT-24DC/500AC-9-T Hybrid motor starter for starting 3~ AC motors up to 550 V AC, with 24 V DC input, 9 A output current, emergency stop function, adjustable overload shutdown, higher transient voltage strength, and push-in connection.
-
2906155 Phoenix Contact – Solenoid driver – MACX MCR-EX-SL-SD-24-48-LFD Ex i solenoid driver for controlling Ex i solenoid valves in hazardous areas, logic input, off-load voltage 24.3 V, current limitation at 48 mA, line fault transparency, error message output, up to SIL 3 according to IEC 61508 screw connection.
-
2906156 Phoenix Contact – Solenoid driver – MACX MCR-EX-SL-SD-24-48-LFD-SP Ex i solenoid driver for controlling Ex i solenoid valves in hazardous areas, logic input, off-load voltage 24.3 V, current limitation at 48 mA, line fault transparency, error message output, up to SIL 3 according to IEC 61508, Push-in connection.
-
2906164 Phoenix Contact – Limit value switches – MACX MCR-EX-SL-UI-REL Limit value switch with Ex i input for active current and voltage signals and a limit-value relay output (changeover contact). Can be set via DIP switch and potentiometer, galvanic 3-way electrical isolation, up to SIL2 (SC3), PLc Cat.1, screw connection.
-
2906165 Phoenix Contact – Limit value switches – MACX MCR-EX-SL-UI-REL-SP Limit value switch with Ex i input for active current and voltage signals and a limit-value relay output (changeover contact). Can be set via DIP switch and potentiometer, galvanic 3-way electrical isolation, up to SIL2 (SC3), PLc Cat.1, Push-in connection.
-
2906169 Phoenix Contact – Limit value switches – MACX MCR-SL-UI-REL Limit value switch with input for active current and voltage signals and a limit-value relay output (changeover contact). Can be set via DIP switch and potentiometer, galvanic 3-way electrical isolation, up to SIL2 (SC3), PLc Cat.1, screw connection.
-
2906170 Phoenix Contact – Limit value switches – MACX MCR-SL-UI-REL-SP Limit value switch with input for active current and voltage signals and a limit-value relay output (changeover contact). Can be set via DIP switch and potentiometer, galvanic 3-way electrical isolation, up to SIL2 (SC3), PLc Cat.1, Push-in connection.