Phoenix Contact
Showing 3777–3792 of 4585 results
-
2908798 Phoenix Contact – Current transducers – MCR-S-20-100-UI-DCI MCR current measuring transducer, programmable and configurable, for measuring direct, alternating and distorted currents, input current 0…20 to 0…100 A, unconfigured
-
2908803 Phoenix Contact – MINI MCR-EX-RPSS-I-I Ex i-Repeater power supply and input signal conditioner transmits supplied or active 0 mA/4 mA … 20 mA signals from the Ex area to a load in the safe area.. HART-transparent, no-load voltage: 15 V AC/DC, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
-
2908805 Phoenix Contact – MINI MCR-EX-IDS-I-I Ex i-Output signal conditioner for isolating and transmitting 0 mA / 4 mA … 20 mA signals from the controller to an intrinsically safe load in the Ex area. HART-transparent, no-load voltage: 27 V AC/DC, Standard configuration, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection
-
2908845 Phoenix Contact – Passive module – VIP-3/SC/2FLK14/AN/2P/S7-1500B VARIOFACE COMPACT LINE interface module for Siemens S7-1500 systems with S7-1500 specific labeling, for channels 21-36, with screw connection, module width: 82.5 mm
-
2908846 Phoenix Contact – Passive module – VIP-3/PT/2FLK14/AN/2P/S7-1500B VARIOFACE COMPACT LINE interface module for Siemens S7-1500 systems with S7-1500 specific labeling, for channels 21-36, with push-in connection, module width: 82.5 mm
-
2908855 Phoenix Contact – Repeater power supply – MACX MCR-EX-SL-RPSSI-2I-1S Ex i measuring transducer supply conditioner and input signal conditioner, only output 1 is HART-transparent. Transmits supplied or active signals from the Ex area with electrical isolation to two loads. SIL 2 in accordance with IEC 61508, screw connection.
-
2908856 Phoenix Contact – Repeater power supply – MACX MCR-EX-SL-RPSSI-2I-1S-SP Ex i measuring transducer supply conditioner and input signal conditioner, only output 1 is HART-transparent. Transmits supplied or active signals from the Ex area with electrical isolation to two loads. SIL 2 in accordance with IEC 61508, Push-in connection.
-
2908894 Phoenix Contact – REL-PR3-48DC/3X21 Plug-in high-power relay with power contacts, 3 N/O contacts, coil voltage: 48 V DC
-
2908897 Phoenix Contact – Single relay – REL-OR3/LDP-48DC/3X21 Plug-in octal relays with power contacts, 3 PDTs, test button, freewheeling diode, mechanical switch position indicator, polarity: A1+, A2-, input voltage: 48 V DC
-
2908898 Phoenix Contact – Single relay – REL-OR3/LDP-110DC/3X21 Plug-in octal relays with power contacts, 3 PDTs, test button, freewheeling diode, mechanical switch position indicator, polarity: A1+, A2-, input voltage: 110 V DC
-
2909509 Phoenix Contact – PLC-RSC- 24DC/21-21/EX PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with power contact, 2 changeover contacts, 24 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
-
2909511 Phoenix Contact – Relay Module – PLC-RSC-120UC/21-21/EX PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with power contact, 2 changeover contacts, 120 V AC/110 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
-
2909512 Phoenix Contact – Relay Module – PLC-RSC-230UC/21-21/EX PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with power contact, 2 changeover contacts, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
-
2909513 Phoenix Contact – Relay Module – PLC-RPT-12DC/21-21/EX PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with power contact, 2 changeover contacts, 12 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
-
2909514 Phoenix Contact – Relay Module – PLC-RPT- 24DC/21-21/EX PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with power contact, 2 changeover contacts, 24 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
-
2909515 Phoenix Contact – Relay Module – PLC-RPT-120UC/21-21/EX PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with power contact, 2 changeover contacts, 120 V AC/110 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.