Phoenix Contact
Showing 3969–3984 of 4585 results
-
2924032 Phoenix Contact – Output signal conditioner – MACX MCR-EX-SL-IDSI-I-SP Ex i output signal conditioner, HART. Isolates and sends intrinsically safe 0/4-20 mA signals to a load (I/P converters, control valves, displays) in Ex areas. Electrical 3-way isolation, wire break recognition, SIL 2 in accordance with IEC 61508, spring-cage connection.
-
2924045 Phoenix Contact – Isolation amplifier – MACX MCR-EX-SL-NAM-R-SP Ex i NAMUR isolating amplifier For operating proximity sensors and switches in Ex areas. The signals are transmitted via a relay output (PDT contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
-
2924061 Phoenix Contact – Isolation amplifier – MACX MCR-EX-SL-NAM-2RO-SP Ex i NAMUR isolating amplifier For operating proximity sensors and switches in Ex areas. The signals are transmitted via 2 relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
-
2924074 Phoenix Contact – Isolation amplifier – MACX MCR-EX-SL-NAM-2T-SP Ex i NAMUR isolating amplifier For operating proximity sensors and switches in Ex areas. The signals are transmitted via 2 transistor outputs (passive) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
-
2924087 Phoenix Contact – Isolation amplifier – MACX MCR-EX-SL-2NAM-RO-SP Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
-
2924090 Phoenix Contact – Isolation amplifier – MACX MCR-EX-SL-2NAM-T-SP Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via transistor outputs (passive) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
-
2924100 Phoenix Contact – Solenoid driver – MACX MCR-EX-SL-SD-21-60-LP-SP Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 58 mA. For gases up to Group IIB, loop-powered, electrical isolation, SIL 3. Push-in connection.
-
2924113 Phoenix Contact – Solenoid driver – MACX MCR-EX-SL-SD-21-25-LP-SP Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 25 mA. For gases up to Group IIC, loop-powered, electrical isolation, SIL 3. Push-in connection.
-
2924126 Phoenix Contact – Solenoid driver – MACX MCR-EX-SL-SD-24-48-LP-SP Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 48 mA. For gases up to Group IIC, loop-powered, electrical isolation, SIL 3. Push-in connection.
-
2924139 Phoenix Contact – MACX MCR-EX-SL-SD-21-40-LP-SP MACX terminal block interface modules MCR-EX-SL-SD- 21-40-LP-SP
-
2924168 Phoenix Contact – Temperature measuring transducer – MACX MCR-EX-SL-RTD-I-SP-NC Ex i temperature measuring transducer: Converts signals from resistance thermometers installed in Ex areas and transmits a 0/4-20 mA signal to a load in the safe area. Freely programmable, 3-way isolation, spring-cage terminal blocks.
-
2924184 Phoenix Contact – Power and error message module – MACX MCR-PTB-SP Power and fault signaling module with Push-in connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector
-
2924207 Phoenix Contact – Power/input isolating amplifier – MACX MCR-SL-RPSSI-I-SP Repeater power supply and input isolating amplifier, HART. Transfers supplied or active 0/4 – 20 mA signals to a load (active or passive). 3-way electrical isolation, SIL 2 according to IEC 61508.
-
2924210 Phoenix Contact – Repeater power supply – MACX MCR-SL-RPSSI-I-UP-SP Repeater power supply for supplying 2 and 3-conductor transmitters with HART transmission and wide range power supply, SIL, Push-in connection
-
2924223 Phoenix Contact – Output signal conditioner – MACX MCR-SL-IDSI-I-SP Output signal conditioner, HART. Isolates and transmits 0/4-20 mA signals to a load (I/P converters, control valves, displays). Electrical 3-way isolation, wire break recognition, SIL 2 in accordance with IEC 61508, Push-in connection.
-
2924236 Phoenix Contact – Repeater power supply – MACX MCR-EX-SL-RPSSI-2I-SP Ex i measuring transducer power supply and input signal conditioner, HART-transparent. Transfers supplied or active 0/4¦20 mA electrical isolation signals from the Ex area to two loads in the safe area. 4-way electrical isolation, Push-in connection, SIL, PL.